LaserParameters PipelineDelay

Set the time that all laser signals are time-shifted relative to the issuance of galvo position commands. This delay is useful for compensating for digital servo controllers that have an inherent processing delay time from when the command input is applied to when the mirrors actually move. Units are micro-seconds.

The maximum pipleine delay value is equivalent to 4000 laser ticks so the specified value maximum will be reduces depending on the LaserTiming value. For example, if LaserTiming is 50 (1usec resolution) then the maximum value will be 4000usec. If LaserTiming is set to 5 (0.1usec resolution), then the maximum piline value is 400usec.